Belts


Belts


Belts


  

 


 

Surface Pattern

รูปแบบของพื้นผิวสายพานลำเลียงสินค้า จะมีให้เลือกใช้งานหลากหลายรูปแบบ


        


        


        

 


 

Splice

นอกจากนี้ เรายังรับตัดต่อ สายพานเพื่อให้ได้ขนาดตามที่ลูกค้าต้องการ ด้วยกรรมวิธีการเชื่อมต่อ ที่หลากหลาย


Splicing Techniques
 

Single Finger Splice

Gives a strong, flexible joint for use with small diameter pulleys,
as well as knife edge rollers. Splice has the same thickness as
the belt and is almost invisible through the cover for optic sorters.
 

Finger over Finger Splice

Used on 2-ply belts to provide a strong and flexible splice.
Suitable for reverse bends. Splice has the same thickness as
the belt and is almost invisible through the cover for optic sorters.
 

Triple Finger Splice

Used on 3-ply belts to provide a strong and flexible splice for
small pulleys. Splice has the same thickness as the belt
and is almost invisible through the cover for optic sorters.
 

Flexible Finger Lace Splice

A fabric reinforced non-metallic lace, which is vulcanized into the
belt. Available in PVC, PU and Fabplast belt grades. It has uniform
thickness in the splice area, and is suitable for Metal Detectors.
 

Staple Lace Splice

The staple securing mechanism ensures that the lace has a
positive anchorage in the belt. Suitable for lightweight and heavier
duty applications. Available in mild steel and stainless steel.
 

Longitudinal Finger Splice

Available in both 2- and 3-ply belts to achieve belt widths
that are wider than standard. Splice is strong and flexible
and has the same thickness as the belt.
 

Plastic Spiral Lace Splice

The lace is installed between the plies of the belt or with
a finger splice. Ideal for Metal Detectors or where a
mechanical lace can cause damage.
 

Finger over Finger Lapped Splice

For use on 2-ply belts to give a strong, flexible splice for
small pulleys. Splice is the same thickness as the belt
and is almost invisible through the cover on optic sorters.
 

Step Lap Joint Splice

Used on thicker carcass belts or when a cold bond must
be done. Very strong splice, which is uniform to the thickness
of the belt. Available in PVC, PU and Fabplast belt grades.
 

Gator / Clipper Hook Splice

A strong and flexible splice, which features a series of
individual hooks that lay flat and smooth. Suitable for troughing
applications. Available in mild steel and stainless steel.
 

Gator / Clipper Hook Splice

A strong and flexible splice, which features a series of
individual hooks that lay flat and smooth. Suitable for troughing
applications. Available in mild steel and stainless steel.

 

 


 

Rubber Conveyor Belts
 

สายพานลำเลียง (Conveyor Belt)
แบบบั้ง (V-Shape)

ลำเลียงววัสดุี่ไม่ได้บรรจุหีบห่อ ในงานี่ลาดชันได้ 17-18 องศา
ลำเลียงวัสดุที่บรรจุหีบห่อในงานลาดชันได้ 30-35 องศา
 

สายพานกะพ้อ
(Elevetor Belt)

ลำเลียงวัสดุในแนวตั้ง และสามารถทนแรงดึงได้สูง

 

สายพานลำเลียง (Conveyor Belt)
แบบเรียบ

ขนาดกว้างสูงสุด 2 เมตร ใช้ลำเลียงวัสดุที่หนัก

 

สายพานลำเลียง แบบน้ำกาวหน้าเดียว
(Flat Cotton Belt)

ใช้สำหรับลำเลียง วัสดุต่างๆ ซึ่งต้องการผิวสะอาด
หรือการเคลื่อนย้าย ผ่านความร้อน
 

สายพานแบบซุปเปอร์เฟล็กซ์
(Super Flex Transmission Belt)

สายพานลำเลียงแบบน้ำกาวหน้าเดียว สำหรับ
การขนส่งแนวดิ่ง ใช้ในงานความตึงเครียดสูง

 

สายพานส่งกำลัง
(Transmission Belt)

เบอร์ 1, 2, 3 ใช้สำหรับเครื่องส่งกำลัง หรือสายพาน
ตัวฉุด และในอุตสาหกรรม โรงสีข้าว สายพานผ้าใบ
34 ออนซ์ (เบอร์ 1) ได้รับมาตรฐาน มอก 124-2518
 

 


 

Teflon Glass Fabic, Tape & Belts

สายพานเทฟลอน (PTFE) จะเพิ่มความแข็งแรงที่ขอบ ของสายพาน
 

ความสามารถ สายพานเทฟลอน:
1.มีค่าสัมประสิทธิ์ ของการขยายตัวสูง (coefficient) และมีการค่าการฉีกขาด (friction) ต่ำ ซึ่งเป็นคุณสมบัติที่ดีของ สายพาน
2.สามารถทนต่อ สภาพการกัดกร่อน การผุกร่อน ทนต่อสารเคมี ( pharmac-euticals)
3.ความพิเศษในความเสถียรภาพต่ออุณหภูมิ โดยสามารถ ทนต่ออุณหภูมิ 232 องศา เซนเซียส หรือต่ำกว่า ได้อย่างต่อเนื่อง
4.สามารถรอรับการ งอ โก่งตัว และต้านทานความล้า ทนต่อแรงดึงแค้นสูง
 


สายพานเทฟลอน (PTFE)

         

5038 0.07 135 1000/1500 16

5058 0.12 255 1000/1500 24

5108 0.2 490 1000/1500/240 47

7148 0.33 680 1000/1500/2000 67

7278 0.70 1085 2006 86



Anti-Static Black-PTFE Glass Fabric

         

7103A 0.23 490 1000/1500/2400 47

7143AS 0.33 680 1000/1500/2400 67

7305AS 0.75 460 2700/3200 37



Open-Mesh PTFE Glass & Kevlar

         

7195 0.45 530 1500 78

7305 0.75 460 2700/3200/4800 37

7305K 0.75 310 2600/3000 67

7305KG 1.4 64 3000/3500 122

 


 

COATED FIBERGLASS BELTING GENERAL FEATURES

 

 

ALLIGATOR SPLICE

An exceptionally strong metal splice which fastens mechanically
and is very flexible. Splice components are locked into reinforced
belt ends which are then meshed and joined by a pin.

OVERLAP SPLICE

A standard splice in which the belt ends are overlapped from 1/2" to 2"
and heat sealed together. A double fabric thickness will result. Excellent
for most non-thickness-critical applications. Splice can be angled from
22? to 90?, and can be stitched for additional strength.

BUTT SPLICE

Belt ends are butted. Fabric reinforcement is placed beneath the splice.
Components are then joined by a heat seal. Splice can be angled from
22? to 90?. Perfect for applications requiring an uninterrupted belt work
surface. Splice can be stitched for additional strength.

FABRIC FLAP OVER SPLICE

Typically, a Teflon? coated fiberglass fabric flap placed over the splice area.
Silicone coated fiberglass also available. Flap is heat sealed and/or stitched
to belt. Usually applied to belts with metal splices (alligator/clipper). Protects
splice from abrasion and provides a continuous release surface.

 


 

สายพานเครื่องขัดไม้ (SANDING BELTS)

SANDING BELTS manufactures for the Woodworking Industry, a range of "ENDLESS WD" belts for Sanders, Planers, Gauges, Calendars etc. Manufactured with a Polyester carcass and covered with Gray Elastomer of varying degrees of Shore Hardness and Surface patterns they have an extremely high coefficient of friction for positive feed. The worldwide success of this SANDING BELTS product is due to a combination of high quality materials used together with modern technology to provide a range of belts which lay flat, with the correct selection of surface pattern, prevents deformation under high pressure.


     


     

 



ติดต่อเรา
ชื่อบริษัท: บริษัท ซันโตซึ ซัพพลาย (ประเทศไทย) จำกัด
ผู้ติดต่อ: คุณจักรพัฒน์
ที่อยู่: 445/94 หมู่ที่ 4 ถนนแพรกษา 14
ตำบล: แพรกษา
อำเภอ/เขต: เมือง
จังหวัด: สมุทรปราการ
ประเทศ: ไทย
รหัสไปรษณีย์: 10280
โทรศัพท์: 02-3243728 (เวลาทำการ จันทร์-ศุกร์ เวลา 08.00-17.00 น.)
เว็บไซต์: www.suntosu.com
อีเมล์: suntosu.2555@gmail.com
ส่งข้อความถึงผู้ผลิต/ผู้ขาย
รหัสประเทศ เบอร์โทรศัพท์
+66
ผิดพลาดกรุณาลองใหม่อีกครั้ง
Copyright ©2021, สร้างเว็บไซต์คุณภาพโดย QuinL.co.th. All Rights Reserved.